Windows 10 BSOD unable to identify faulty component

  • Thread starter Thread starter PatipanWongkleaw
  • Start date Start date
P

PatipanWongkleaw

My computer bsod problem started around 2.5 month ago.
I got various error messages such as
"SYSTEM_THREAD_EXCEPTION_NOT_HANDLED",
"MEMORY_MANAGEMENT",
"DRIVER_IRQL_NOT_LESS_OR_EQUAL",
"SYSTEM_SERVICE_EXCEPTION",
"HYPERVISOR_ERROR",
"CRITICAL_PROCESS_DIE",
"MULTIPLE_IRP_COMPLETE_REQUEST", etc.

The most frequent is DRIVER_IRQL_NOT_LESS_OR_EQUAL and SYSTEM_SERVICE_EXCEPTION.

I updated all the driver and bios(GPU, mainboard bios), but, it doesn't fix the problem.

I run memtest86+ on every combination of my 4 ram each for 4-22 hours, the result is no error detected.
I did remove gpu to let it use onboard gpu instead, the problem still occur.

I've formatted hard disk and my ssd to flesh install windows and the problem still not fix.

I've run out of things to do to fix the problem so I decide to ask the community, pleas help me.


-----computer spec-----

MB: MSI-Z97Gaming5
CPU: Intel core i-5 4690 with water cooling
GPU: Palit GTX1080
RAM: 4x(4GB G.Skill trident x) = 16 GB
SSD: Sandisk ultra II 240 GB (use for install windows)
HDD: WD 2TB
PSU: XPREDATOR 750GM 80+GOLD 750 Watt
OS: Windows 10 , 10.0, build: 16299

Mouse: Logitech G502 proteus spectrum
Keyboard: CMSTORM Trigger Z Red switch
Headset: Mazer TypeX 7.1 Ch (hs909)
USB Bluetooth: Avantree DG40S
USB Wireless: TP-LINK .....something......


----WhoCrashed report----

System Information (local)
Computer name: XXXXXXXX
Windows version: Windows 10 , 10.0, build: 16299
Windows dir: C:\Windows
Hardware: MS-7917, MSI, Z97 GAMING 5 (MS-7917)
CPU: GenuineIntel Intel(R) Core(TM) i5-4690 CPU @ 3.50GHz Intel586, level: 6
4 logical processors, active mask: 15
RAM: 17056956416 bytes total



Crash Dump Analysis
Crash dumps are enabled on your computer.

Crash dump directories:
C:\Windows
C:\Windows\Minidump

On Fri 23/3/2018 13:38:10 your computer crashed or a problem was reported
crash dump file: C:\Windows\Minidump\032318-4484-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x175510)
Bugcheck code: 0x1A (0x403, 0xFFFF9C80FBDB78C8, 0x82000001A70F3847, 0xEFFF9C80FBDB78C8)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a severe memory management error occurred. The page table and PFNs are out of sync . This is probably a hardware error, especially if parameters 3 & 4 differ by only a single bit.
This is likely to be caused by a hardware problem. This error suggests a case of memory corruption because of a hardware problem. It is suggested you do a test on your RAM modules (memory test) and make sure your system is not getting overheated. This problem might also be caused because of overheating (thermal issue).
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Fri 23/3/2018 13:38:10 your computer crashed or a problem was reported
crash dump file: C:\Windows\MEMORY.DMP
This was probably caused by the following module: ntkrnlmp.exe (nt!PsChargeProcessNonPagedPoolQuota+0x85C6)
Bugcheck code: 0x1A (0x403, 0xFFFF9C80FBDB78C8, 0x82000001A70F3847, 0xEFFF9C80FBDB78C8)
Error: MEMORY_MANAGEMENT
Bug check description: This indicates that a severe memory management error occurred. The page table and PFNs are out of sync . This is probably a hardware error, especially if parameters 3 & 4 differ by only a single bit.
This is likely to be caused by a hardware problem. This error suggests a case of memory corruption because of a hardware problem. It is suggested you do a test on your RAM modules (memory test) and make sure your system is not getting overheated. This problem might also be caused because of overheating (thermal issue).
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Fri 23/3/2018 13:16:32 your computer crashed or a problem was reported
crash dump file: C:\Windows\Minidump\032318-4093-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x175510)
Bugcheck code: 0xA (0xFFFFFFFFFFFFFFFF, 0x2, 0x0, 0xFFFFF8031E6F29AA)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft? Windows? Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above. This is a software bug.
This bug check belongs to the crash dump test that you have performed with WhoCrashed or other software. It means that a crash dump file was properly written out.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



-----Minidump file-----
Dropbox - 032318-4093-01.dmp

Dropbox - 032318-4484-01.dmp

Continue reading...
 

Similar threads

C
Replies
0
Views
5
Cristian Chavez4
C
O
Replies
0
Views
6
Oskar Podkaura
O
K
Replies
0
Views
3
Keed Laranga
K
Back
Top