Windows 10 How to correct a transparent bridge issue that appears as "PCI to PCI Bridge" with code 10?

  • Thread starter Thread starter JB2023
  • Start date Start date
J

JB2023

I have a PMC data acquisition card installed on a PCIe to PMC adapter plugged into a thunderbolt chassis. This configuration works fine with a PC but, when I connect it to a laptop, I receive "This device cannot start (code 10)".The issue appears to be related to the bridge device(IDT TSI384) located on the PCIe to PMC adapter.On the PC, the bridge appears correctly under "System Devices" as "PCI Express to PCI(-X) Bridge".On the Laptop, the bridge appears under "System Devices" as "PCI to PCI Bridge" with code 10.I have been using this bridge device for years without any driver related issues

Continue reading...
 
You must log in or register to reply here.

Similar threads

J
Windows 10 PCI Device, PCI Simple Communications Controller, SM Bus Controller device drivers are not installed
Replies
0
Views
11
Jerome Hermoso
J
H
Windows 11 How would I resolve this SSD related issue?
Replies
0
Views
9
himamushi
H
A
Windows 11 Error code 0xd000a002 that appears every time I attempt to log in using a PIN after restarting my laptop?
Replies
0
Views
1
Andrew_0_
A
B
Windows 10 WHEA logger error 17 PCI epress errors!
Replies
0
Views
17
benjaminkronaveter
B
T
Windows 11 Virtual Pci Express Port Failed to Power on with Error 'A hypervisor feature is not available to the user'
Replies
0
Views
27
TB7747
T
Back
Top