D
DolanWhite
First of all, these are the BSOD related errors I've been getting.
-------------------------------------------
system_thread_exception_not_handled
ntoskrnl.exe
irql not less or equal
nvlddmkm.sys
stop code memory management
ntfs.sys failed
attempted execute of no execute memory
-------------------------------------------
Here are the steps I've taken so far.
1. My ram passed the memtest (but i replaced them anyway, still getting BSOD)
2. Did a FRESH install of Windows 10 on another HDD. Still BSOD
3. Reapplied thermal paste to my CPU in case it was overheating
4. Made sure my RAM is compatible with my motherboard.
5. Reinstalled Windows 10 multiple times
6. Used the recommended settings for Driver Verifier (i also tried deleting the settings)
7. Disabled all non-microsoft startup apps and services
8. Made sure drivers for my motherboard, GPU, and CPU were all updated to the latest settings (I even tried older drivers)
9. Checked device manager to make sure no drivers had any errors
10. Let windows 10 update all drivers itself and I installed all of the latest updates
11. I have no antivirus installed
12. I have obtained a BSOD even in safe mode.
13. I have done NO overclocker whatsoever.
14. I have tried enabling/disabling the XMP profile for my RAM (both old and new RAM)
15. Windows memory diagnostics came back with no errors.
Here are my system specs
RTX 2070 Super
Ryzen 5 3600 (w/ an AIO 280mm watercooler
Corsair Vengeance DDR4 2666 8GB
Corsair RM 750X
Tomahawk B450 (with latest BIOS)
As you can see I've exhausted every avenue I can to the best of my ability. Unfortunately, I do not know how to read minidumps. Any help would be much appreciated. At this point I'm assuming either my graphics card, cpu or motherboard is faulty and causing these errors.
Here is a onedrive link to my last 5 minidumps as well as a save all of my event viewer.
1drv.ms
Also keep in mind, I'm living in Thailand temporarily so it might take some time for me to respond. Thank you.
Continue reading...
-------------------------------------------
system_thread_exception_not_handled
ntoskrnl.exe
irql not less or equal
nvlddmkm.sys
stop code memory management
ntfs.sys failed
attempted execute of no execute memory
-------------------------------------------
Here are the steps I've taken so far.
1. My ram passed the memtest (but i replaced them anyway, still getting BSOD)
2. Did a FRESH install of Windows 10 on another HDD. Still BSOD
3. Reapplied thermal paste to my CPU in case it was overheating
4. Made sure my RAM is compatible with my motherboard.
5. Reinstalled Windows 10 multiple times
6. Used the recommended settings for Driver Verifier (i also tried deleting the settings)
7. Disabled all non-microsoft startup apps and services
8. Made sure drivers for my motherboard, GPU, and CPU were all updated to the latest settings (I even tried older drivers)
9. Checked device manager to make sure no drivers had any errors
10. Let windows 10 update all drivers itself and I installed all of the latest updates
11. I have no antivirus installed
12. I have obtained a BSOD even in safe mode.
13. I have done NO overclocker whatsoever.
14. I have tried enabling/disabling the XMP profile for my RAM (both old and new RAM)
15. Windows memory diagnostics came back with no errors.
Here are my system specs
RTX 2070 Super
Ryzen 5 3600 (w/ an AIO 280mm watercooler
Corsair Vengeance DDR4 2666 8GB
Corsair RM 750X
Tomahawk B450 (with latest BIOS)
As you can see I've exhausted every avenue I can to the best of my ability. Unfortunately, I do not know how to read minidumps. Any help would be much appreciated. At this point I'm assuming either my graphics card, cpu or motherboard is faulty and causing these errors.
Here is a onedrive link to my last 5 minidumps as well as a save all of my event viewer.
Microsoft OneDrive
Also keep in mind, I'm living in Thailand temporarily so it might take some time for me to respond. Thank you.
Continue reading...