L
lanihuli
my new lenovo just started having issues:
1st time, I put it to sleep, and when I went to log on the next day, the laptop was BLAZING hot.. I couldn't even shut it down, cause the power button was too hot, so I used a pen to try to turn it off.
2nd time, I'm logged on, and it just stops responding..
all the other times, same thing - but now it's kicking out the blue screen error -
lenovo support suggested I run whocrashed and this is the report that kicked out (is the first and then others afterwards not related?):
System Information (local)
Windows version: Windows 10, 10.0, version 1909, build: 18363
Windows dir: C:\Windows
Hardware: 81TE, LENOVO, LNVNB161216
CPU: Genuine Intel Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz 8664, level: 6
12 logical processors, active mask: 4095
RAM: 12632121344 bytes (11.8GB)
Crash Dump Analysis
Crash dumps are enabled on your computer.
Crash dump directories:
C:\Windows
C:\Windows\Minidump
On Fri 11/13/2020 7:59:04 AM your computer crashed or a problem was reported
crash dump file: C:\Windows\minidump\111320-8515-01.dmp
This was probably caused by the following module: pdc.sys (pdc+0x223F6)
Bugcheck code: 0x14F (0x1, 0x1, 0xFFFF89019276E190, 0xFFFF9B057E32FA50)
Error: PDC_WATCHDOG_TIMEOUT
file path: C:\Windows\system32\drivers\pdc.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Power Dependency Coordinator Driver
Bug check description: This indicates that a system component failed to respond within the allocated time period, preventing the system from exiting connected standby.
This is likely to be caused by a hardware problem.
The crash took place in a Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Fri 11/13/2020 7:59:04 AM your computer crashed or a problem was reported
crash dump file: C:\Windows\MEMORY.DMP
This was probably caused by the following module: pdc.sys (pdc+0x223F6)
Bugcheck code: 0x14F (0x1, 0x1, 0xFFFF89019276E190, 0xFFFF9B057E32FA50)
Error: PDC_WATCHDOG_TIMEOUT
file path: C:\Windows\system32\drivers\pdc.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Power Dependency Coordinator Driver
Bug check description: This indicates that a system component failed to respond within the allocated time period, preventing the system from exiting connected standby.
This is likely to be caused by a hardware problem.
The crash took place in a Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Tue 11/10/2020 7:14:51 AM your computer crashed or a problem was reported
crash dump file: C:\Windows\minidump\111020-11250-01.dmp
This was probably caused by the following module: pdc.sys (pdc+0x223F6)
Bugcheck code: 0x14F (0x1, 0x1, 0xFFFF928A836560D0, 0xFFFF8700C957FA50)
Error: PDC_WATCHDOG_TIMEOUT
file path: C:\Windows\system32\drivers\pdc.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Power Dependency Coordinator Driver
Bug check description: This indicates that a system component failed to respond within the allocated time period, preventing the system from exiting connected standby.
This is likely to be caused by a hardware problem.
The crash took place in a Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Wed 11/4/2020 7:51:18 AM your computer crashed or a problem was reported
crash dump file: C:\Windows\minidump\110420-10406-01.dmp
This was probably caused by the following module: pdc.sys (pdc+0x223F6)
Bugcheck code: 0x14F (0x1, 0x1, 0xFFFFD880A8EDCB40, 0xFFFFC0833DE77A50)
Error: PDC_WATCHDOG_TIMEOUT
file path: C:\Windows\system32\drivers\pdc.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Power Dependency Coordinator Driver
Bug check description: This indicates that a system component failed to respond within the allocated time period, preventing the system from exiting connected standby.
This is likely to be caused by a hardware problem.
The crash took place in a Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Mon 7/13/2020 5:09:05 PM your computer crashed or a problem was reported
crash dump file: C:\Windows\minidump\071520-14750-01.dmp
This was probably caused by the following module: pdc.sys (pdc+0x223F6)
Bugcheck code: 0x14F (0x4, 0x1, 0xFFFFC2049EB04B70, 0xFFFF8C8BDF4C1A50)
Error: PDC_WATCHDOG_TIMEOUT
file path: C:\Windows\system32\drivers\pdc.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Power Dependency Coordinator Driver
Bug check description: This indicates that a system component failed to respond within the allocated time period, preventing the system from exiting connected standby.
This is likely to be caused by a hardware problem.
The crash took place in a Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Fri 6/5/2020 6:07:17 PM your computer crashed or a problem was reported
crash dump file: C:\Windows\LiveKernelReports\DripsWatchdog-20200605-1807.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!IoUnregisterShutdownNotification+0xBDE)
Bugcheck code: 0x15F (0x2, 0xFFFFA58DD4D31010, 0xFFFFFFFF, 0xFFFFA58DCF9839A0)
Error: CONNECTED_STANDBY_WATCHDOG_TIMEOUT_LIVEDUMP
Bug check description: This indicates that a connected standby watchdog timeout has occurred.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
what do I do? I use it for work, every day, and this whole dying for no reason is crazy! and it's happening more often?
mahalo plenty for any help!
Continue reading...
1st time, I put it to sleep, and when I went to log on the next day, the laptop was BLAZING hot.. I couldn't even shut it down, cause the power button was too hot, so I used a pen to try to turn it off.
2nd time, I'm logged on, and it just stops responding..
all the other times, same thing - but now it's kicking out the blue screen error -
lenovo support suggested I run whocrashed and this is the report that kicked out (is the first and then others afterwards not related?):
System Information (local)
Windows version: Windows 10, 10.0, version 1909, build: 18363
Windows dir: C:\Windows
Hardware: 81TE, LENOVO, LNVNB161216
CPU: Genuine Intel Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz 8664, level: 6
12 logical processors, active mask: 4095
RAM: 12632121344 bytes (11.8GB)
Crash Dump Analysis
Crash dumps are enabled on your computer.
Crash dump directories:
C:\Windows
C:\Windows\Minidump
On Fri 11/13/2020 7:59:04 AM your computer crashed or a problem was reported
crash dump file: C:\Windows\minidump\111320-8515-01.dmp
This was probably caused by the following module: pdc.sys (pdc+0x223F6)
Bugcheck code: 0x14F (0x1, 0x1, 0xFFFF89019276E190, 0xFFFF9B057E32FA50)
Error: PDC_WATCHDOG_TIMEOUT
file path: C:\Windows\system32\drivers\pdc.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Power Dependency Coordinator Driver
Bug check description: This indicates that a system component failed to respond within the allocated time period, preventing the system from exiting connected standby.
This is likely to be caused by a hardware problem.
The crash took place in a Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Fri 11/13/2020 7:59:04 AM your computer crashed or a problem was reported
crash dump file: C:\Windows\MEMORY.DMP
This was probably caused by the following module: pdc.sys (pdc+0x223F6)
Bugcheck code: 0x14F (0x1, 0x1, 0xFFFF89019276E190, 0xFFFF9B057E32FA50)
Error: PDC_WATCHDOG_TIMEOUT
file path: C:\Windows\system32\drivers\pdc.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Power Dependency Coordinator Driver
Bug check description: This indicates that a system component failed to respond within the allocated time period, preventing the system from exiting connected standby.
This is likely to be caused by a hardware problem.
The crash took place in a Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Tue 11/10/2020 7:14:51 AM your computer crashed or a problem was reported
crash dump file: C:\Windows\minidump\111020-11250-01.dmp
This was probably caused by the following module: pdc.sys (pdc+0x223F6)
Bugcheck code: 0x14F (0x1, 0x1, 0xFFFF928A836560D0, 0xFFFF8700C957FA50)
Error: PDC_WATCHDOG_TIMEOUT
file path: C:\Windows\system32\drivers\pdc.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Power Dependency Coordinator Driver
Bug check description: This indicates that a system component failed to respond within the allocated time period, preventing the system from exiting connected standby.
This is likely to be caused by a hardware problem.
The crash took place in a Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Wed 11/4/2020 7:51:18 AM your computer crashed or a problem was reported
crash dump file: C:\Windows\minidump\110420-10406-01.dmp
This was probably caused by the following module: pdc.sys (pdc+0x223F6)
Bugcheck code: 0x14F (0x1, 0x1, 0xFFFFD880A8EDCB40, 0xFFFFC0833DE77A50)
Error: PDC_WATCHDOG_TIMEOUT
file path: C:\Windows\system32\drivers\pdc.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Power Dependency Coordinator Driver
Bug check description: This indicates that a system component failed to respond within the allocated time period, preventing the system from exiting connected standby.
This is likely to be caused by a hardware problem.
The crash took place in a Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Mon 7/13/2020 5:09:05 PM your computer crashed or a problem was reported
crash dump file: C:\Windows\minidump\071520-14750-01.dmp
This was probably caused by the following module: pdc.sys (pdc+0x223F6)
Bugcheck code: 0x14F (0x4, 0x1, 0xFFFFC2049EB04B70, 0xFFFF8C8BDF4C1A50)
Error: PDC_WATCHDOG_TIMEOUT
file path: C:\Windows\system32\drivers\pdc.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Power Dependency Coordinator Driver
Bug check description: This indicates that a system component failed to respond within the allocated time period, preventing the system from exiting connected standby.
This is likely to be caused by a hardware problem.
The crash took place in a Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
On Fri 6/5/2020 6:07:17 PM your computer crashed or a problem was reported
crash dump file: C:\Windows\LiveKernelReports\DripsWatchdog-20200605-1807.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!IoUnregisterShutdownNotification+0xBDE)
Bugcheck code: 0x15F (0x2, 0xFFFFA58DD4D31010, 0xFFFFFFFF, 0xFFFFA58DCF9839A0)
Error: CONNECTED_STANDBY_WATCHDOG_TIMEOUT_LIVEDUMP
Bug check description: This indicates that a connected standby watchdog timeout has occurred.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
what do I do? I use it for work, every day, and this whole dying for no reason is crazy! and it's happening more often?
mahalo plenty for any help!
Continue reading...