Windows 10 Windows 10 Powercfg Report---How to correct problems reported

  • Thread starter Thread starter mstepanovic
  • Start date Start date
M

mstepanovic

I have ran a powercfg report the provided the below information. What error is most important to fix? How do you fix them? Are there any errors that don't have fixes?

Analysis Results Errors

USB Suspend:USB Device not Entering Selective Suspend
This device did not enter the USB Selective Suspend state. Processor power management may be prevented when this USB device is not in the Selective Suspend state. Note that this issue will not prevent the system from sleeping.
Device NameUSB Composite Device
Host Controller IDPCI\VEN_8086&DEV_9D2F
Host Controller LocationPCI bus 0, device 20, function 0
Device IDUSB\VID_046D&PID_C52B
Port Path1
CPU Utilization:Processor utilization is high
The average processor utilization during the trace was high. The system will consume less power when the average processor utilization is very low. Review processor utilization for individual processes to determine which applications and services contribute the most to total processor utilization.
Average Utilization (%)35.94
Platform Power Management Capabilities:PCI Express Active-State Power Management (ASPM) Disabled
PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility with the hardware in this computer.
Device Drivers:
Devices with missing or misconfigured drivers can increase power consumption.
Device NameCisco AnyConnect Secure Mobility Client Virtual Miniport Adapter for Windows x64
Device IDROOT\NET\0000
Device Status0x1802401
Device Problem Code0x16
Warnings
Platform Timer Resolution:Platform Timer Resolution
The default platform timer resolution is 15.6ms (15625000ns) and should be used whenever the system is idle. If the timer resolution is increased, processor power management technologies may not be effective. The timer resolution may be increased due to multimedia playback or graphical animations.
Current Timer Resolution (100ns units)10000
Maximum Timer Period (100ns units)156250
Platform Timer Resolution:Outstanding Timer Request
A program or service has requested a timer resolution smaller than the platform maximum timer resolution.
Requested Period10000
Requesting Process ID19288
Requesting Process Path\Device\HarddiskVolume3\Program Files (x86)\Google\Chrome\Application\chrome.exe
CPU Utilization:Individual process with significant processor utilization.
This process is responsible for a significant portion of the total processor utilization recorded during the trace.
Process Namechrome.exe
PID6576
Average Utilization (%)7.89
ModuleAverage Module Utilization (%)
\Device\HarddiskVolume3\Program Files (x86)\Google\Chrome\Application\84.0.4147.105\chrome.dll6.53
0.85
\SystemRoot\system32\ntoskrnl.exe0.24

After this, I have 25 more of the same CPU errors. Should I worry about these?

Continue reading...
 
Back
Top