M
MarcMc16615
Ok. This is a relatively new computer that I cannot update Windows. I am getting error code:
2020-04 Cumulative Update for Windows 10 Version 1909 for x64-based Systems (KB4549951) - Error 0x8000ffff
The computer is also crashing repeatedly getting stop codes:
system_service_exception
critical_structure_corruption
kernel_security_check_failure
driver_power_state_failure
dpc_watchdog_violation
memory_management
IRQL_not_less_or_equal
system_thread_exception_thread_not_handled
I have updated the bios and all drivers that I can think of and run a windows memory check. Any suggestions?
Here are my system details:
OS Name Microsoft Windows 10 Pro
Version 10.0.18363 Build 18363
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name DESKTOP-AE92KIP
System Manufacturer System manufacturer
System Model System Product Name
System Type x64-based PC
System SKU SKU
Processor AMD Ryzen 5 2600X Six-Core Processor, 3600 Mhz, 6 Core(s), 12 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 3003, 12/9/2019
SMBIOS Version 3.2
Embedded Controller Version 255.255
BIOS Mode Legacy
BaseBoard Manufacturer ASUSTeK COMPUTER INC.
BaseBoard Product ROG STRIX B450-F GAMING
BaseBoard Version Rev 1.xx
Platform Role Desktop
Secure Boot State Unsupported
PCR7 Configuration Binding Not Possible
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "10.0.18362.387"
User Name DESKTOP-AE92KIP\Quinten
Time Zone Central Daylight Time
Installed Physical Memory (RAM) 16.0 GB
Total Physical Memory 15.9 GB
Available Physical Memory 12.3 GB
Total Virtual Memory 18.3 GB
Available Virtual Memory 12.7 GB
Page File Space 2.38 GB
Page File C:\pagefile.sys
Kernel DMA Protection Off
Virtualization-based security Not enabled
Device Encryption Support Reasons for failed automatic device encryption: TPM is not usable, PCR7 binding is not supported, Hardware Security Test Interface failed and device is not Modern Standby, Un-allowed DMA capable bus/device(s) detected, TPM is not usable
Hyper-V - VM Monitor Mode Extensions Yes
Hyper-V - Second Level Address Translation Extensions Yes
Hyper-V - Virtualization Enabled in Firmware No
Hyper-V - Data Execution Protection Yes
I have an NVIDIA GeForce GTX 1060 6GB installed
Also 500GB m.2 SSD
Continue reading...
2020-04 Cumulative Update for Windows 10 Version 1909 for x64-based Systems (KB4549951) - Error 0x8000ffff
The computer is also crashing repeatedly getting stop codes:
system_service_exception
critical_structure_corruption
kernel_security_check_failure
driver_power_state_failure
dpc_watchdog_violation
memory_management
IRQL_not_less_or_equal
system_thread_exception_thread_not_handled
I have updated the bios and all drivers that I can think of and run a windows memory check. Any suggestions?
Here are my system details:
OS Name Microsoft Windows 10 Pro
Version 10.0.18363 Build 18363
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name DESKTOP-AE92KIP
System Manufacturer System manufacturer
System Model System Product Name
System Type x64-based PC
System SKU SKU
Processor AMD Ryzen 5 2600X Six-Core Processor, 3600 Mhz, 6 Core(s), 12 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 3003, 12/9/2019
SMBIOS Version 3.2
Embedded Controller Version 255.255
BIOS Mode Legacy
BaseBoard Manufacturer ASUSTeK COMPUTER INC.
BaseBoard Product ROG STRIX B450-F GAMING
BaseBoard Version Rev 1.xx
Platform Role Desktop
Secure Boot State Unsupported
PCR7 Configuration Binding Not Possible
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "10.0.18362.387"
User Name DESKTOP-AE92KIP\Quinten
Time Zone Central Daylight Time
Installed Physical Memory (RAM) 16.0 GB
Total Physical Memory 15.9 GB
Available Physical Memory 12.3 GB
Total Virtual Memory 18.3 GB
Available Virtual Memory 12.7 GB
Page File Space 2.38 GB
Page File C:\pagefile.sys
Kernel DMA Protection Off
Virtualization-based security Not enabled
Device Encryption Support Reasons for failed automatic device encryption: TPM is not usable, PCR7 binding is not supported, Hardware Security Test Interface failed and device is not Modern Standby, Un-allowed DMA capable bus/device(s) detected, TPM is not usable
Hyper-V - VM Monitor Mode Extensions Yes
Hyper-V - Second Level Address Translation Extensions Yes
Hyper-V - Virtualization Enabled in Firmware No
Hyper-V - Data Execution Protection Yes
I have an NVIDIA GeForce GTX 1060 6GB installed
Also 500GB m.2 SSD
Continue reading...