M
MikeShep06
Good Afternoon,
I have an issue where my WMI is showing as invalid due to invalid namespace. I ran WMIDiag and tried about every solution I could find with no avail. I don't have much history with this so I'm not 100% what I should even be looking for other than I can see some files missing that appear to be VERY important. I do see the 4 listed "missing" files existing under the Repository Folder and the security permissions seem to be full control to Admins and System so I don't think the issue is there. Thanks in advance!
.2769 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2770 15:25:32 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
.2771 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2772 15:25:32 (0) **
.2773 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2774 15:25:32 (0) ** Windows 8.1 - No Service Pack - 64-bit (17763) - User 'CFO-228-LAPTOP1\POS' on computer 'CFO-228-LAPTOP1'.
.2775 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2776 15:25:32 (0) ** Environment: ........................................................................................................ OK.
.2777 15:25:32 (0) ** There are no missing WMI system files: .............................................................................. OK.
.2778 15:25:32 (1) !! ERROR: The following WMI repository file(s) is/are missing: ......................................................... 4 ERROR(S)!
.2779 15:25:32 (0) ** - INDEX.BTR
.2780 15:25:32 (0) ** - MAPPING1.MAP
.2781 15:25:32 (0) ** - MAPPING2.MAP
.2782 15:25:32 (0) ** - OBJECTS.DATA
.2783 15:25:32 (0) ** => To fix this issue:
.2784 15:25:32 (0) ** - ENSURE you have all access rights to the WMI repository folder.
.2785 15:25:32 (0) ** - ENSURE you run WMIDiag as an Administrator.
.2786 15:25:32 (0) ** => If the issue is not due to a lack of privileges, and folder/files are really missing, while
.2787 15:25:32 (0) ** the WMI service successfully started, then WMI will rebuild the repository based on the
.2788 15:25:32 (0) ** auto-recovery mechanism. In such a case, WMI repository files shoud be available after the execution
.2789 15:25:32 (0) ** of WMIDiag. Check WMIDiag LOG.
.2790 15:25:32 (0) ** => If the issue is NOT due to a lack of privileges, and folder/files are really missing, while
.2791 15:25:32 (0) ** the WMI service does not start, then additional errors should be displayed (i.e. registry, DCOM, service hosts).
.2792 15:25:32 (0) ** You must fix those issues first!
.2793 15:25:32 (0) ** => After fixing issues, if the files are still missing and if you do not want WMI to rebuild
.2794 15:25:32 (0) ** the WMI repository, then you must restore the WMI repository from a previous backup.
.2795 15:25:32 (0) ** Note: The System State backup or the System Restore snapshot contain a backup of
.2796 15:25:32 (0) ** of the WMI repository.
.2797 15:25:32 (0) ** => If no backup is available, you must rebuild the repository.
.2798 15:25:32 (0) ** Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
.2799 15:25:32 (0) ** otherwise some applications may fail after the reconstruction.
.2800 15:25:32 (0) ** This can be achieved with the following command:
.2801 15:25:32 (0) ** i.e. 'WMIDiag ShowMOFErrors'
.2802 15:25:32 (0) ** Note: Any missing MOF files, or existing MOF files not listed in the Auto-recovery
.2803 15:25:32 (0) ** registry key will be excluded from the WMI repository reconstruction.
.2804 15:25:32 (0) ** This may imply the lost of WMI registration information.
.2805 15:25:32 (0) ** Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
.2806 15:25:32 (0) ** ALL fixes previously mentioned.
.2807 15:25:32 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
.2808 15:25:32 (0) ** => To rebuild the WMI repository, you must:
.2809 15:25:32 (0) ** - Reset the WMI repository
.2810 15:25:32 (0) ** (The WMI repository rebuilt is based on auto-recovery)
.2811 15:25:32 (0) ** i.e. 'WINMGMT /ResetRepository'
.2812 15:25:32 (0) ** OR
.2813 15:25:32 (0) ** - Salvage the WMI repository if you want to attempt the retrieval of good data from the
.2814 15:25:32 (0) ** inconsistent repository
.2815 15:25:32 (0) ** (The repository rebuilt is based on auto-recovery + salvage)
.2816 15:25:32 (0) ** i.e. 'WINMGMT /SalvageRepository'
.2817 15:25:32 (0) **
.2818 15:25:32 (0) ** WMI repository state: ............................................................................................... N/A.
.2819 15:25:32 (0) ** AFTER running WMIDiag:
.2820 15:25:32 (0) ** The WMI repository has a size of: ................................................................................... 34 MB.
.2821 15:25:32 (0) ** - Disk free space on 'C:': .......................................................................................... 388776 MB.
.2822 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2823 15:25:32 (2) !! WARNING: Windows Firewall: .......................................................................................... DISABLED.
.2824 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2825 15:25:32 (0) ** DCOM Status: ........................................................................................................ OK.
.2826 15:25:32 (0) ** WMI registry setup: ................................................................................................. OK.
.2827 15:25:32 (0) ** INFO: WMI service has dependents: ................................................................................... 2 SERVICE(S)!
.2828 15:25:32 (0) ** - Security Center (*) (WSCSVC, StartMode='Automatic')
.2829 15:25:32 (0) ** - Internet Connection Sharing (ICS) (*) (SHAREDACCESS, StartMode='Disabled')
.2830 15:25:32 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
.2831 15:25:32 (0) ** Note: If the service is marked with (*), it means that the service/application uses WMI but
.2832 15:25:32 (0) ** there is no hard dependency on WMI. However, if the WMI service is stopped,
.2833 15:25:32 (0) ** this can prevent the service/application to work as expected.
.2834 15:25:32 (0) **
.2835 15:25:32 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
.2836 15:25:32 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
.2837 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2838 15:25:32 (0) ** WMI service DCOM setup: ............................................................................................. OK.
.2839 15:25:32 (0) ** WMI components DCOM registrations: .................................................................................. OK.
.2840 15:25:32 (0) ** WMI ProgID registrations: ........................................................................................... OK.
.2841 15:25:32 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
.2842 15:25:32 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
.2843 15:25:32 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
.2844 15:25:32 (0) ** WMI providers EXE/DLL availability: ................................................................................. OK.
.2845 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2846 15:25:32 (0) ** INFO: User Account Control (UAC): ................................................................................... ENABLED.
.2847 15:25:32 (0) ** => WMI tasks requiring Administrative privileges on this computer MUST run in an elevated context.
.2848 15:25:32 (0) ** i.e. You can start your scripts or WMIC commands from an elevated command
.2849 15:25:32 (0) ** prompt by right clicking on the 'Command Prompt' icon in the Start Menu and
.2850 15:25:32 (0) ** selecting 'Run as Administrator'.
.2851 15:25:32 (0) ** i.e. You can also execute the WMI scripts or WMIC commands as a task
.2852 15:25:32 (0) ** in the Task Scheduler within the right security context.
.2853 15:25:32 (0) **
.2854 15:25:32 (0) ** INFO: Local Account Filtering: ...................................................................................... ENABLED.
.2855 15:25:32 (0) ** => WMI tasks remotely accessing WMI information on this computer and requiring Administrative
.2856 15:25:32 (0) ** privileges MUST use a DOMAIN account part of the Local Administrators group of this computer
.2857 15:25:32 (0) ** to ensure that administrative privileges are granted. If a Local User account is used for remote
.2858 15:25:32 (0) ** accesses, it will be reduced to a plain user (filtered token), even if it is part of the Local Administrators group.
.2859 15:25:32 (0) **
.2860 15:25:32 (0) ** Overall DCOM security status: ....................................................................................... OK.
.2861 15:25:32 (0) ** Overall WMI security status: ........................................................................................ OK.
.2862 15:25:32 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
.2863 15:25:32 (0) ** WMI permanent SUBSCRIPTION(S): ...................................................................................... NONE.
.2864 15:25:32 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
.2865 15:25:32 (1) !! ERROR: WMI MONIKER CONNECTION errors occured for the following namespaces: .......................................... 1 ERROR(S)!
.2866 15:25:32 (0) ** - ROOT/SECURITY, 0x80041003 - (WBEM_E_ACCESS_DENIED) Current user does not have permission to perform the action.
.2867 15:25:32 (0) **
.2868 15:25:32 (1) !! ERROR: WMI CONNECTION errors occured for the following namespaces: .................................................. 14 ERROR(S)!
.2869 15:25:32 (0) ** - ROOT/SECURITY, 0x80041003 - (WBEM_E_ACCESS_DENIED) Current user does not have permission to perform the action.
.2870 15:25:32 (0) ** - Root/subscription, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2871 15:25:32 (0) ** - Root/CIMV2, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2872 15:25:32 (0) ** - Root/CIMV2/Security, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2873 15:25:32 (0) ** - Root/CIMV2/Applications, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2874 15:25:32 (0) ** - Root/nap, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2875 15:25:32 (0) ** - Root/SECURITY, 0x80041003 - (WBEM_E_ACCESS_DENIED) Current user does not have permission to perform the action.
.2876 15:25:32 (0) ** - Root/STANDARDCIMV2, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2877 15:25:32 (0) ** - Root/WMI, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2878 15:25:32 (0) ** - Root/directory, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2879 15:25:32 (0) ** - Root/directory/LDAP, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2880 15:25:32 (0) ** - Root/Microsoft, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2881 15:25:32 (0) ** - Root/Microsoft/HomeNet, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2882 15:25:32 (0) ** - Root/aspnet, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2883 15:25:32 (0) **
.2884 15:25:32 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 16 ERROR(S)!
.2885 15:25:32 (0) ** - Root, __SystemSecurity, 0x80041003 - (WBEM_E_ACCESS_DENIED) Current user does not have permission to perform the action.
.2886 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2887 15:25:32 (0) ** - ROOT/DEFAULT, __SystemSecurity, 0x80041003 - (WBEM_E_ACCESS_DENIED) Current user does not have permission to perform the action.
.2888 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2889 15:25:32 (0) ** - ROOT/SECURITYCENTER2, __SystemSecurity, 0x80041003 - (WBEM_E_ACCESS_DENIED) Current user does not have permission to perform the action.
.2890 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2891 15:25:32 (0) ** - ROOT/SECURITYCENTER, __SystemSecurity, 0x80041003 - (WBEM_E_ACCESS_DENIED) Current user does not have permission to perform the action.
.2892 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2893 15:25:32 (0) ** - Root/DEFAULT, LogFileEventConsumer, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2894 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2895 15:25:32 (0) ** - Root/DEFAULT, ActiveScriptEventConsumer, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2896 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2897 15:25:32 (0) ** - Root/DEFAULT, NTEventLogEventConsumer, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2898 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2899 15:25:32 (0) ** - Root/DEFAULT, SMTPEventConsumer, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2900 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2901 15:25:32 (0) ** - Root/DEFAULT, CommandLineEventConsumer, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2902 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2903 15:25:32 (0) ** - Root/DEFAULT, RegistryEvent, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2904 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2905 15:25:32 (0) ** - Root/DEFAULT, RegistryKeyChangeEvent, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2906 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2907 15:25:32 (0) ** - Root/DEFAULT, RegistryTreeChangeEvent, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2908 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2909 15:25:32 (0) ** - Root/DEFAULT, RegistryValueChangeEvent, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2910 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2911 15:25:32 (0) ** - Root/DEFAULT, StdRegProv, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2912 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2913 15:25:32 (0) ** - Root/DEFAULT, SystemRestoreConfig, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2914 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2915 15:25:32 (0) ** - Root/DEFAULT, SystemRestore, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2916 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2917 15:25:32 (0) **
.2918 15:25:32 (0) ** WMI MOF representations: ............................................................................................ OK.
.2919 15:25:32 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
.2920 15:25:32 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
.2921 15:25:32 (0) ** WMI EXECQUERY operations: ........................................................................................... OK.
.2922 15:25:32 (0) ** WMI GET VALUE operations: ........................................................................................... OK.
.2923 15:25:32 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
.2924 15:25:32 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
.2925 15:25:32 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
.2926 15:25:32 (0) ** WMI static instances retrieved: ..................................................................................... 20.
.2927 15:25:32 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
.2928 15:25:32 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 0.
.2929 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2930 15:25:32 (0) **
.2931 15:25:32 (0) ** 7 error(s) 0x80041003 - (WBEM_E_ACCESS_DENIED) Current user does not have permission to perform the action
.2932 15:25:32 (0) ** => This error is typically due to insufficient or restricted permissions in the examined system.
.2933 15:25:32 (0) ** => ENSURE you are a Full Administrator of the examined system, if the WMI provider or the
.2934 15:25:32 (0) ** WMI system security do not enforce any restrictions.
.2935 15:25:32 (0) **
.2936 15:25:32 (0) **
.2937 15:25:32 (0) ** 12 error(s) 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found
.2938 15:25:32 (0) **
.2939 15:25:32 (0) ** 12 error(s) 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found
.2940 15:25:32 (0) ** => This error is typically a WMI error. This WMI error is due to:
.2941 15:25:32 (0) ** - a missing WMI class definition or object.
.2942 15:25:32 (0) ** (See any GET, ENUMERATION, EXECQUERY and GET VALUE operation failures).
.2943 15:25:32 (0) ** You can correct the missing class definitions by:
.2944 15:25:32 (0) ** - Manually recompiling the MOF file(s) with the 'MOFCOMP <FileName.MOF>' command.
.2945 15:25:32 (0) ** Note: You can build a list of classes in relation with their WMI provider and MOF file with WMIDiag.
.2946 15:25:32 (0) ** (This list can be built on a similar and working WMI Windows installation)
.2947 15:25:32 (0) ** The following command line must be used:
.2948 15:25:32 (0) ** i.e. 'WMIDiag CorrelateClassAndProvider'
.2949 15:25:32 (0) ** - a WMI repository corruption.
.2950 15:25:32 (0) ** In such a case, you must rerun WMIDiag with 'WriteInRepository' parameter
.2951 15:25:32 (0) ** to validate the WMI repository operations.
.2952 15:25:32 (0) ** Note: ENSURE you are an administrator with FULL access to WMI EVERY namespaces of the computer before
.2953 15:25:32 (0) ** executing the WriteInRepository command. To write temporary data from the Root namespace, use:
.2954 15:25:32 (0) ** i.e. 'WMIDiag WriteInRepository=Root'
.2955 15:25:32 (0) ** - If the WriteInRepository command fails, while being an Administrator with ALL accesses to ALL namespaces
.2956 15:25:32 (0) ** the WMI repository must be reconstructed.
.2957 15:25:32 (0) ** Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
.2958 15:25:32 (0) ** otherwise some applications may fail after the reconstruction.
.2959 15:25:32 (0) ** This can be achieved with the following command:
.2960 15:25:32 (0) ** i.e. 'WMIDiag ShowMOFErrors'
.2961 15:25:32 (0) ** Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
.2962 15:25:32 (0) ** ALL fixes previously mentioned.
.2963 15:25:32 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
.2964 15:25:32 (0) **
.2965 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2966 15:25:32 (0) ** WMI Registry key setup: ............................................................................................. OK.
.2967 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2968 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2969 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2970 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2971 15:25:32 (0) **
.2972 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2973 15:25:32 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
.2974 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2975 15:25:32 (0) **
.2976 15:25:32 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!. Check 'C:\USERS\POS\APPDATA\LOCAL\TEMP\WMIDIAG-V2.2_WIN8.1_.CLI.RTM.64_CFO-228-LAPTOP1_2019.06.25_15.25.02.LOG' for details.
.2977 15:25:32 (0) **
.2978 15:25:32 (0) ** WMIDiag v2.2 ended on Tuesday, June 25, 2019 at 15:25 (W:25 E:44 S:1).
Continue reading...
I have an issue where my WMI is showing as invalid due to invalid namespace. I ran WMIDiag and tried about every solution I could find with no avail. I don't have much history with this so I'm not 100% what I should even be looking for other than I can see some files missing that appear to be VERY important. I do see the 4 listed "missing" files existing under the Repository Folder and the security permissions seem to be full control to Admins and System so I don't think the issue is there. Thanks in advance!
.2769 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2770 15:25:32 (0) ** ----------------------------------------------------- WMI REPORT: BEGIN ----------------------------------------------------------
.2771 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2772 15:25:32 (0) **
.2773 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2774 15:25:32 (0) ** Windows 8.1 - No Service Pack - 64-bit (17763) - User 'CFO-228-LAPTOP1\POS' on computer 'CFO-228-LAPTOP1'.
.2775 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2776 15:25:32 (0) ** Environment: ........................................................................................................ OK.
.2777 15:25:32 (0) ** There are no missing WMI system files: .............................................................................. OK.
.2778 15:25:32 (1) !! ERROR: The following WMI repository file(s) is/are missing: ......................................................... 4 ERROR(S)!
.2779 15:25:32 (0) ** - INDEX.BTR
.2780 15:25:32 (0) ** - MAPPING1.MAP
.2781 15:25:32 (0) ** - MAPPING2.MAP
.2782 15:25:32 (0) ** - OBJECTS.DATA
.2783 15:25:32 (0) ** => To fix this issue:
.2784 15:25:32 (0) ** - ENSURE you have all access rights to the WMI repository folder.
.2785 15:25:32 (0) ** - ENSURE you run WMIDiag as an Administrator.
.2786 15:25:32 (0) ** => If the issue is not due to a lack of privileges, and folder/files are really missing, while
.2787 15:25:32 (0) ** the WMI service successfully started, then WMI will rebuild the repository based on the
.2788 15:25:32 (0) ** auto-recovery mechanism. In such a case, WMI repository files shoud be available after the execution
.2789 15:25:32 (0) ** of WMIDiag. Check WMIDiag LOG.
.2790 15:25:32 (0) ** => If the issue is NOT due to a lack of privileges, and folder/files are really missing, while
.2791 15:25:32 (0) ** the WMI service does not start, then additional errors should be displayed (i.e. registry, DCOM, service hosts).
.2792 15:25:32 (0) ** You must fix those issues first!
.2793 15:25:32 (0) ** => After fixing issues, if the files are still missing and if you do not want WMI to rebuild
.2794 15:25:32 (0) ** the WMI repository, then you must restore the WMI repository from a previous backup.
.2795 15:25:32 (0) ** Note: The System State backup or the System Restore snapshot contain a backup of
.2796 15:25:32 (0) ** of the WMI repository.
.2797 15:25:32 (0) ** => If no backup is available, you must rebuild the repository.
.2798 15:25:32 (0) ** Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
.2799 15:25:32 (0) ** otherwise some applications may fail after the reconstruction.
.2800 15:25:32 (0) ** This can be achieved with the following command:
.2801 15:25:32 (0) ** i.e. 'WMIDiag ShowMOFErrors'
.2802 15:25:32 (0) ** Note: Any missing MOF files, or existing MOF files not listed in the Auto-recovery
.2803 15:25:32 (0) ** registry key will be excluded from the WMI repository reconstruction.
.2804 15:25:32 (0) ** This may imply the lost of WMI registration information.
.2805 15:25:32 (0) ** Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
.2806 15:25:32 (0) ** ALL fixes previously mentioned.
.2807 15:25:32 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
.2808 15:25:32 (0) ** => To rebuild the WMI repository, you must:
.2809 15:25:32 (0) ** - Reset the WMI repository
.2810 15:25:32 (0) ** (The WMI repository rebuilt is based on auto-recovery)
.2811 15:25:32 (0) ** i.e. 'WINMGMT /ResetRepository'
.2812 15:25:32 (0) ** OR
.2813 15:25:32 (0) ** - Salvage the WMI repository if you want to attempt the retrieval of good data from the
.2814 15:25:32 (0) ** inconsistent repository
.2815 15:25:32 (0) ** (The repository rebuilt is based on auto-recovery + salvage)
.2816 15:25:32 (0) ** i.e. 'WINMGMT /SalvageRepository'
.2817 15:25:32 (0) **
.2818 15:25:32 (0) ** WMI repository state: ............................................................................................... N/A.
.2819 15:25:32 (0) ** AFTER running WMIDiag:
.2820 15:25:32 (0) ** The WMI repository has a size of: ................................................................................... 34 MB.
.2821 15:25:32 (0) ** - Disk free space on 'C:': .......................................................................................... 388776 MB.
.2822 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2823 15:25:32 (2) !! WARNING: Windows Firewall: .......................................................................................... DISABLED.
.2824 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2825 15:25:32 (0) ** DCOM Status: ........................................................................................................ OK.
.2826 15:25:32 (0) ** WMI registry setup: ................................................................................................. OK.
.2827 15:25:32 (0) ** INFO: WMI service has dependents: ................................................................................... 2 SERVICE(S)!
.2828 15:25:32 (0) ** - Security Center (*) (WSCSVC, StartMode='Automatic')
.2829 15:25:32 (0) ** - Internet Connection Sharing (ICS) (*) (SHAREDACCESS, StartMode='Disabled')
.2830 15:25:32 (0) ** => If the WMI service is stopped, the listed service(s) will have to be stopped as well.
.2831 15:25:32 (0) ** Note: If the service is marked with (*), it means that the service/application uses WMI but
.2832 15:25:32 (0) ** there is no hard dependency on WMI. However, if the WMI service is stopped,
.2833 15:25:32 (0) ** this can prevent the service/application to work as expected.
.2834 15:25:32 (0) **
.2835 15:25:32 (0) ** RPCSS service: ...................................................................................................... OK (Already started).
.2836 15:25:32 (0) ** WINMGMT service: .................................................................................................... OK (Already started).
.2837 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2838 15:25:32 (0) ** WMI service DCOM setup: ............................................................................................. OK.
.2839 15:25:32 (0) ** WMI components DCOM registrations: .................................................................................. OK.
.2840 15:25:32 (0) ** WMI ProgID registrations: ........................................................................................... OK.
.2841 15:25:32 (0) ** WMI provider DCOM registrations: .................................................................................... OK.
.2842 15:25:32 (0) ** WMI provider CIM registrations: ..................................................................................... OK.
.2843 15:25:32 (0) ** WMI provider CLSIDs: ................................................................................................ OK.
.2844 15:25:32 (0) ** WMI providers EXE/DLL availability: ................................................................................. OK.
.2845 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2846 15:25:32 (0) ** INFO: User Account Control (UAC): ................................................................................... ENABLED.
.2847 15:25:32 (0) ** => WMI tasks requiring Administrative privileges on this computer MUST run in an elevated context.
.2848 15:25:32 (0) ** i.e. You can start your scripts or WMIC commands from an elevated command
.2849 15:25:32 (0) ** prompt by right clicking on the 'Command Prompt' icon in the Start Menu and
.2850 15:25:32 (0) ** selecting 'Run as Administrator'.
.2851 15:25:32 (0) ** i.e. You can also execute the WMI scripts or WMIC commands as a task
.2852 15:25:32 (0) ** in the Task Scheduler within the right security context.
.2853 15:25:32 (0) **
.2854 15:25:32 (0) ** INFO: Local Account Filtering: ...................................................................................... ENABLED.
.2855 15:25:32 (0) ** => WMI tasks remotely accessing WMI information on this computer and requiring Administrative
.2856 15:25:32 (0) ** privileges MUST use a DOMAIN account part of the Local Administrators group of this computer
.2857 15:25:32 (0) ** to ensure that administrative privileges are granted. If a Local User account is used for remote
.2858 15:25:32 (0) ** accesses, it will be reduced to a plain user (filtered token), even if it is part of the Local Administrators group.
.2859 15:25:32 (0) **
.2860 15:25:32 (0) ** Overall DCOM security status: ....................................................................................... OK.
.2861 15:25:32 (0) ** Overall WMI security status: ........................................................................................ OK.
.2862 15:25:32 (0) ** - Started at 'Root' --------------------------------------------------------------------------------------------------------------
.2863 15:25:32 (0) ** WMI permanent SUBSCRIPTION(S): ...................................................................................... NONE.
.2864 15:25:32 (0) ** WMI TIMER instruction(s): ........................................................................................... NONE.
.2865 15:25:32 (1) !! ERROR: WMI MONIKER CONNECTION errors occured for the following namespaces: .......................................... 1 ERROR(S)!
.2866 15:25:32 (0) ** - ROOT/SECURITY, 0x80041003 - (WBEM_E_ACCESS_DENIED) Current user does not have permission to perform the action.
.2867 15:25:32 (0) **
.2868 15:25:32 (1) !! ERROR: WMI CONNECTION errors occured for the following namespaces: .................................................. 14 ERROR(S)!
.2869 15:25:32 (0) ** - ROOT/SECURITY, 0x80041003 - (WBEM_E_ACCESS_DENIED) Current user does not have permission to perform the action.
.2870 15:25:32 (0) ** - Root/subscription, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2871 15:25:32 (0) ** - Root/CIMV2, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2872 15:25:32 (0) ** - Root/CIMV2/Security, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2873 15:25:32 (0) ** - Root/CIMV2/Applications, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2874 15:25:32 (0) ** - Root/nap, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2875 15:25:32 (0) ** - Root/SECURITY, 0x80041003 - (WBEM_E_ACCESS_DENIED) Current user does not have permission to perform the action.
.2876 15:25:32 (0) ** - Root/STANDARDCIMV2, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2877 15:25:32 (0) ** - Root/WMI, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2878 15:25:32 (0) ** - Root/directory, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2879 15:25:32 (0) ** - Root/directory/LDAP, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2880 15:25:32 (0) ** - Root/Microsoft, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2881 15:25:32 (0) ** - Root/Microsoft/HomeNet, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2882 15:25:32 (0) ** - Root/aspnet, 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found.
.2883 15:25:32 (0) **
.2884 15:25:32 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 16 ERROR(S)!
.2885 15:25:32 (0) ** - Root, __SystemSecurity, 0x80041003 - (WBEM_E_ACCESS_DENIED) Current user does not have permission to perform the action.
.2886 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2887 15:25:32 (0) ** - ROOT/DEFAULT, __SystemSecurity, 0x80041003 - (WBEM_E_ACCESS_DENIED) Current user does not have permission to perform the action.
.2888 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2889 15:25:32 (0) ** - ROOT/SECURITYCENTER2, __SystemSecurity, 0x80041003 - (WBEM_E_ACCESS_DENIED) Current user does not have permission to perform the action.
.2890 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2891 15:25:32 (0) ** - ROOT/SECURITYCENTER, __SystemSecurity, 0x80041003 - (WBEM_E_ACCESS_DENIED) Current user does not have permission to perform the action.
.2892 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2893 15:25:32 (0) ** - Root/DEFAULT, LogFileEventConsumer, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2894 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2895 15:25:32 (0) ** - Root/DEFAULT, ActiveScriptEventConsumer, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2896 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2897 15:25:32 (0) ** - Root/DEFAULT, NTEventLogEventConsumer, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2898 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2899 15:25:32 (0) ** - Root/DEFAULT, SMTPEventConsumer, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2900 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2901 15:25:32 (0) ** - Root/DEFAULT, CommandLineEventConsumer, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2902 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2903 15:25:32 (0) ** - Root/DEFAULT, RegistryEvent, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2904 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2905 15:25:32 (0) ** - Root/DEFAULT, RegistryKeyChangeEvent, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2906 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2907 15:25:32 (0) ** - Root/DEFAULT, RegistryTreeChangeEvent, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2908 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2909 15:25:32 (0) ** - Root/DEFAULT, RegistryValueChangeEvent, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2910 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2911 15:25:32 (0) ** - Root/DEFAULT, StdRegProv, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2912 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2913 15:25:32 (0) ** - Root/DEFAULT, SystemRestoreConfig, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2914 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2915 15:25:32 (0) ** - Root/DEFAULT, SystemRestore, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
.2916 15:25:32 (0) ** MOF Registration: 'WMI information not available (This could be the case for an external application or a third party WMI provider)'
.2917 15:25:32 (0) **
.2918 15:25:32 (0) ** WMI MOF representations: ............................................................................................ OK.
.2919 15:25:32 (0) ** WMI QUALIFIER access operations: .................................................................................... OK.
.2920 15:25:32 (0) ** WMI ENUMERATION operations: ......................................................................................... OK.
.2921 15:25:32 (0) ** WMI EXECQUERY operations: ........................................................................................... OK.
.2922 15:25:32 (0) ** WMI GET VALUE operations: ........................................................................................... OK.
.2923 15:25:32 (0) ** WMI WRITE operations: ............................................................................................... NOT TESTED.
.2924 15:25:32 (0) ** WMI PUT operations: ................................................................................................. NOT TESTED.
.2925 15:25:32 (0) ** WMI DELETE operations: .............................................................................................. NOT TESTED.
.2926 15:25:32 (0) ** WMI static instances retrieved: ..................................................................................... 20.
.2927 15:25:32 (0) ** WMI dynamic instances retrieved: .................................................................................... 0.
.2928 15:25:32 (0) ** WMI instance request cancellations (to limit performance impact): ................................................... 0.
.2929 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2930 15:25:32 (0) **
.2931 15:25:32 (0) ** 7 error(s) 0x80041003 - (WBEM_E_ACCESS_DENIED) Current user does not have permission to perform the action
.2932 15:25:32 (0) ** => This error is typically due to insufficient or restricted permissions in the examined system.
.2933 15:25:32 (0) ** => ENSURE you are a Full Administrator of the examined system, if the WMI provider or the
.2934 15:25:32 (0) ** WMI system security do not enforce any restrictions.
.2935 15:25:32 (0) **
.2936 15:25:32 (0) **
.2937 15:25:32 (0) ** 12 error(s) 0x8004100E - (WBEM_E_INVALID_NAMESPACE) Namespace specified cannot be found
.2938 15:25:32 (0) **
.2939 15:25:32 (0) ** 12 error(s) 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found
.2940 15:25:32 (0) ** => This error is typically a WMI error. This WMI error is due to:
.2941 15:25:32 (0) ** - a missing WMI class definition or object.
.2942 15:25:32 (0) ** (See any GET, ENUMERATION, EXECQUERY and GET VALUE operation failures).
.2943 15:25:32 (0) ** You can correct the missing class definitions by:
.2944 15:25:32 (0) ** - Manually recompiling the MOF file(s) with the 'MOFCOMP <FileName.MOF>' command.
.2945 15:25:32 (0) ** Note: You can build a list of classes in relation with their WMI provider and MOF file with WMIDiag.
.2946 15:25:32 (0) ** (This list can be built on a similar and working WMI Windows installation)
.2947 15:25:32 (0) ** The following command line must be used:
.2948 15:25:32 (0) ** i.e. 'WMIDiag CorrelateClassAndProvider'
.2949 15:25:32 (0) ** - a WMI repository corruption.
.2950 15:25:32 (0) ** In such a case, you must rerun WMIDiag with 'WriteInRepository' parameter
.2951 15:25:32 (0) ** to validate the WMI repository operations.
.2952 15:25:32 (0) ** Note: ENSURE you are an administrator with FULL access to WMI EVERY namespaces of the computer before
.2953 15:25:32 (0) ** executing the WriteInRepository command. To write temporary data from the Root namespace, use:
.2954 15:25:32 (0) ** i.e. 'WMIDiag WriteInRepository=Root'
.2955 15:25:32 (0) ** - If the WriteInRepository command fails, while being an Administrator with ALL accesses to ALL namespaces
.2956 15:25:32 (0) ** the WMI repository must be reconstructed.
.2957 15:25:32 (0) ** Note: The WMI repository reconstruction requires to locate all MOF files needed to rebuild the repository,
.2958 15:25:32 (0) ** otherwise some applications may fail after the reconstruction.
.2959 15:25:32 (0) ** This can be achieved with the following command:
.2960 15:25:32 (0) ** i.e. 'WMIDiag ShowMOFErrors'
.2961 15:25:32 (0) ** Note: The repository reconstruction must be a LAST RESORT solution and ONLY after executing
.2962 15:25:32 (0) ** ALL fixes previously mentioned.
.2963 15:25:32 (2) !! WARNING: Static information stored by external applications in the repository will be LOST! (i.e. SMS Inventory)
.2964 15:25:32 (0) **
.2965 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2966 15:25:32 (0) ** WMI Registry key setup: ............................................................................................. OK.
.2967 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2968 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2969 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2970 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2971 15:25:32 (0) **
.2972 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2973 15:25:32 (0) ** ------------------------------------------------------ WMI REPORT: END -----------------------------------------------------------
.2974 15:25:32 (0) ** ----------------------------------------------------------------------------------------------------------------------------------
.2975 15:25:32 (0) **
.2976 15:25:32 (0) ** ERROR: WMIDiag detected issues that could prevent WMI to work properly!. Check 'C:\USERS\POS\APPDATA\LOCAL\TEMP\WMIDIAG-V2.2_WIN8.1_.CLI.RTM.64_CFO-228-LAPTOP1_2019.06.25_15.25.02.LOG' for details.
.2977 15:25:32 (0) **
.2978 15:25:32 (0) ** WMIDiag v2.2 ended on Tuesday, June 25, 2019 at 15:25 (W:25 E:44 S:1).
Continue reading...
